bulletine
Regular Contributor
"4.5 MCE-B- 1A
I have a pro
"4.5 MCE-B- 1A
I have a problem with the coolant over flowing into the recovery tank, and it is boiling. I removed the cooling pump and tested it and it is working. Removed the thermostats and tested them and they open and close correctly.
The raw water system is pumping water through the exhaust and a good flow. But there is a dripping and I intend on pulling it out and checking that and the impeller.
I found a Trawler had the same problem but have not seen how it was corrected.
Can anyone provide any light into resolving this problem.
Thanks"
I have a pro
"4.5 MCE-B- 1A
I have a problem with the coolant over flowing into the recovery tank, and it is boiling. I removed the cooling pump and tested it and it is working. Removed the thermostats and tested them and they open and close correctly.
The raw water system is pumping water through the exhaust and a good flow. But there is a dripping and I intend on pulling it out and checking that and the impeller.
I found a Trawler had the same problem but have not seen how it was corrected.
Can anyone provide any light into resolving this problem.
Thanks"