Hey Everyone,
I have a 1982 Evinrude 60hp (E60TLCNM) outboard on a little boat and i have just checked the prop for any major damage but while doing so noticed these cracks (click me to see) anyway not sure if this is part of a separate plate as on the underside there is a noticeable line between the forward part and where the cracks are this looks to indicate that maybe this is a separate plate (click me to see) if this is a plate could someone please let me know and if not the same would greatly appreciate all comments and help as im a bit of a newbie to the boating world. for reference these images is what im talking about (click me to see) its under the hydrofoil and this motor is old but seems to be well looked after i bought around 2 years ago and i can confirm it hasnt touched the water for those 2 years and 1 year prior to my knowledge but around 4 weeks ago i got it going after a weekend fix up. had low hours i believe and wasnt used much but seems to be a tough bugger,
cheers, mitchell.
I have a 1982 Evinrude 60hp (E60TLCNM) outboard on a little boat and i have just checked the prop for any major damage but while doing so noticed these cracks (click me to see) anyway not sure if this is part of a separate plate as on the underside there is a noticeable line between the forward part and where the cracks are this looks to indicate that maybe this is a separate plate (click me to see) if this is a plate could someone please let me know and if not the same would greatly appreciate all comments and help as im a bit of a newbie to the boating world. for reference these images is what im talking about (click me to see) its under the hydrofoil and this motor is old but seems to be well looked after i bought around 2 years ago and i can confirm it hasnt touched the water for those 2 years and 1 year prior to my knowledge but around 4 weeks ago i got it going after a weekend fix up. had low hours i believe and wasnt used much but seems to be a tough bugger,
cheers, mitchell.