Logo

O2 Honda Bf50D. BBEJ-1006776

Richard131

New member
Is it normal for my Honda BF50D BBEJ-1006776 to have its b22690 40200 probe? Does that number correspond to 35655-ZY3-c01?


On the web I only get the number b22690 40203. Can I use it?
 
Is it normal for my Honda BF50D BBEJ-1006776 to have its b22690 40200 probe? Does that number correspond to 35655-ZY3-c01?


On the web I only get the number b22690 40203. Can I use it?
It's likely an after market sensor. That's not necessarily a bad thing -IF- it's running OK.
 
I see that under "Features and Details" that the b22690 is listed as one it replaces.

Good luck.
 
Hello friends, I only ask because I have read on the web, honda-marine. That my engine with frame BBEJ-006776 has the 35655-ZZ5-004, does anyone know if it is correct? I have an alarm code 01, the engine works correctly, I have changed the vst filter... the fuel pressure is good. I want to buy the O2 sensor but I don't want to make a mistake with its reference. Does anyone know what O2 probe my bf50D engine with frame BBEJ-006776 has? Thank you
 
Hola amigos, solo pregunto porque he leido en la web, honda-marine. Que mi motor con chasis BBEJ-1006776 tiene el 35655-ZZ5-004, alguien sabe si es correcto? Tengo un código de alarma 01, el motor funciona correctamente, he cambiado el filtro vst... la presión de combustible es buena. Quiero comprar el sensor de O2 pero no quiero equivocarme con su referencia. Alguien sabe que sonda de O2 tiene mi motor bf50D con chasis BBEJ-1006776? Gracias
 
Véase el artículo 15 en el enlace a continuación.


Por supuesto, puede haber una "actualización" acompañada de una sustitución que podría explicar el último número de pieza que enumeró, pero no tengo forma de averiguarlo. Un distribuidor de Honda Marine lo sabría con seguridad.

Buena suerte.
Thank you very much for your kindness in answering. This web page is where I have seen that my BF50D model with S/N BBEJ-1006776 would have 35655-ZZ5-004 o_O

 
Richard, I'm not sure you are aware that some people are using aftermarket sensors that work just fine? The reason they do that is due to the difference in the cost of the parts (OEM vs. aftermarket). Nobody is saying you HAVE to use the Honda OEM part to allow the engine to run properly.
 
If I have tried to buy the aftermarket part. But I can't find out if my engine is 35655-ZZ5-004 or 35655-ZY3-C01. Does anyone know which probe is the one I show in the photo?

Thank you, you are all very kind.

Sin título.jpg
IMG_20230430_113542.jpg
 
Back
Top