s2sailorlis
Member
So here I am thinking....i'm not getting any higher RPM's because the carb float is wrong, or the throttle friction piece is worn....
when I worked on the motor over the winter the cylinder head looked perfect. after rebuilding the water pump and carb, I am thinking EASY STREET....wrong...after tank testing at home, it seemed to be OK...but wasn't really able to rev her up in the small tub. so i went out today and took the boat out...could not get much past maybe half throttle, and it still seemed to lose power somewhat. (was like that at start of year)...
total power loss but was able to sail back onto the mooring...
poked around and saw this....argh....
QUESTION: In looking at Parts Catalog - it states Cylinder Head part # 369010010M CYLINDER HEAD is NOT INTERCHANGEABLE....what does this mean...?
when I worked on the motor over the winter the cylinder head looked perfect. after rebuilding the water pump and carb, I am thinking EASY STREET....wrong...after tank testing at home, it seemed to be OK...but wasn't really able to rev her up in the small tub. so i went out today and took the boat out...could not get much past maybe half throttle, and it still seemed to lose power somewhat. (was like that at start of year)...
total power loss but was able to sail back onto the mooring...
poked around and saw this....argh....
QUESTION: In looking at Parts Catalog - it states Cylinder Head part # 369010010M CYLINDER HEAD is NOT INTERCHANGEABLE....what does this mean...?
Attachments
Last edited: