Cbarrett33
New member
Hey everyone, I purchased a 1997 mercruiser maxum 2300. Has the 250 hp 305 inboard motor. I took it to the shop to get it checked and they rebuilt the carburetor, gave it a tune up, changed the oil and filter. I installed a new starter and replaced the belt. Me and buddy took the boat out to the ocean this past Saturday. It started fine we drove it around for about 35 minutes. Stopped and fished for about 2 hours. When I went to start it I made a lou grinding sound and it would not turn over. I used 5/8 socket and turned the crank shaft pulley maybe 1/4 inch, and then turned the key and it started up almost as If the motor was seized. Every time I shut it down or it would bog out i had to turn the crank shift pulley manually. It got really aggravating, can anyone please give me any advice or help to point me in the right direction. This is my first boat am I hoping to enjoy it before it breaks my wallet.
Thank you everyone for taking the time and patience to help me out. I appreciate any advice you all have.
Thank you everyone for taking the time and patience to help me out. I appreciate any advice you all have.