Logo

Motor filling with water.

RustyTool

New member
I have a 1965 6hp Evinrude motor. When I pulled the plugs to see if I had compression, water pumped from the spark plug holes. The gaskets and seals have been replaced on the drive shaft, including the gasket on the bottom of the motor. Where could the water be leaking into the motor. There are no apparent crakes on the outside of the motor.
 
Other water-entry routes: Turning motor upside down after removing it from boat. Needless to say dropping it overboard will do it too. How long have you had it?
 
Back
Top