yukonmicro
New member
hello there:
need some help.
have a 22' boat with a mcm260 engine. 1.98:1 pre alpha drive.
both of which did not come with the boat.
mercury says boat came with a 1.50:1 ratio.
need to put a new lower unit on a was wondering what ratio to order.
would like to run a 21 or 23" stainless cleaver prop.
boat weighs 3700 lbs. with a 1/4 tank of fuel.
expect loaded weight to be around 4300 to 4500 lbs.
any ideas or advise would be greatly appreciated.
regards
yukonmicro
need some help.
have a 22' boat with a mcm260 engine. 1.98:1 pre alpha drive.
both of which did not come with the boat.
mercury says boat came with a 1.50:1 ratio.
need to put a new lower unit on a was wondering what ratio to order.
would like to run a 21 or 23" stainless cleaver prop.
boat weighs 3700 lbs. with a 1/4 tank of fuel.
expect loaded weight to be around 4300 to 4500 lbs.
any ideas or advise would be greatly appreciated.
regards
yukonmicro