cliff_mygatt
New member
I have a 2006 5.0 MPI with a c
I have a 2006 5.0 MPI with a closed cooling system and B-3 outdrive in a Bayliner 265 SB. I have had a Guardian system alarm and have isolated the alarm to sea water pressure based on disconnection the sensor and the alarm going away. I have 191 hours on the engine and suspect the seawater pump needs an overhaul. The seawater pump is below the fuel pump and that is below the exhaust riser. Very tight spot. I would appreciate some advice for getting the pump out so I can overhaul it myself. The local Maintenance guys are suggesting pulling the engine would be the easiest way at $95 per hour for 10 hours of work (ouch). Any suggestiong would be helpful. I am planning of working it this coming weekend.
I have a 2006 5.0 MPI with a closed cooling system and B-3 outdrive in a Bayliner 265 SB. I have had a Guardian system alarm and have isolated the alarm to sea water pressure based on disconnection the sensor and the alarm going away. I have 191 hours on the engine and suspect the seawater pump needs an overhaul. The seawater pump is below the fuel pump and that is below the exhaust riser. Very tight spot. I would appreciate some advice for getting the pump out so I can overhaul it myself. The local Maintenance guys are suggesting pulling the engine would be the easiest way at $95 per hour for 10 hours of work (ouch). Any suggestiong would be helpful. I am planning of working it this coming weekend.