Courageous351
Member
Hi guys, my 4 stroke mariner 5hp circa 2008 maybe? The throttle twist rotates and it is connected at the drum end but the throttle linkage to the carb does not move. The drum is split into two parts, a top piece which connects via rod to the carb, the lower piece which the cables connect to. For the life of me I cannot see what stops the upper and lower half from slipping as it currently does. I have looked closely and cannot see a pin or dog snapped off, it just seems to butt together.
According to the parts diagram I found attached, items 29 and 31 have nothing in between.
Hoping you can please help!
Thanks in advance.
According to the parts diagram I found attached, items 29 and 31 have nothing in between.
Hoping you can please help!
Thanks in advance.