whaler_warner
Contributing Member
Hi Guys,
I took on a project boat which came with a "free" 1995 Tohatsu 90, it was lightly stripped and I am just putting it back together so I can crank it over and check compression before going much further.
under the CDI unit there is a large plug (plus two additional wires pink and light green) which connects the motor to the control box (I have the control box) but not the wiring harness.
Looking up the part number I can only find "new" which is expensive.
I have seen a few used Tohatsu harnesses which have been cut off boats but look like they have a similar plug on ebay all with different part numbers to the part number listed for the 90 but does anyone know if say a 50/70 will plug in and I can use to hook up to the control box?
I took on a project boat which came with a "free" 1995 Tohatsu 90, it was lightly stripped and I am just putting it back together so I can crank it over and check compression before going much further.
under the CDI unit there is a large plug (plus two additional wires pink and light green) which connects the motor to the control box (I have the control box) but not the wiring harness.
Looking up the part number I can only find "new" which is expensive.
I have seen a few used Tohatsu harnesses which have been cut off boats but look like they have a similar plug on ebay all with different part numbers to the part number listed for the 90 but does anyone know if say a 50/70 will plug in and I can use to hook up to the control box?