jeckel7234
Member
Hi all,
I'm rebuilding the carb on a Johnson 4hp I believe its 1998 Model #J4REEA. I ordered a rebuild kit from boats.net part #0439070. I believe the welch is too small, its pretty much the same size as hole underneath it, and wont sit on the edge for me to press it in. Ill attach some pictures and Id really appreciate some advice.
Thanks,
-Drew
The Carb
https://goo.gl/photos/rJ4Yaqe7MT2TSUbY9
The Old Welch Plug Dimension
https://goo.gl/photos/jjevj7NU7SxHq7bM8
The New Welch Plug Dimension
https://goo.gl/photos/ZT9P6t5VmTHEXo1YA
Carb Outer Wall Dimension
https://goo.gl/photos/B2sSYod7ujWNWzHs6
Carb Inner Wall Dimension
https://goo.gl/photos/cT4pnqQs7rvVfC7SA
I'm rebuilding the carb on a Johnson 4hp I believe its 1998 Model #J4REEA. I ordered a rebuild kit from boats.net part #0439070. I believe the welch is too small, its pretty much the same size as hole underneath it, and wont sit on the edge for me to press it in. Ill attach some pictures and Id really appreciate some advice.
Thanks,
-Drew
The Carb
https://goo.gl/photos/rJ4Yaqe7MT2TSUbY9
The Old Welch Plug Dimension
https://goo.gl/photos/jjevj7NU7SxHq7bM8
The New Welch Plug Dimension
https://goo.gl/photos/ZT9P6t5VmTHEXo1YA
Carb Outer Wall Dimension
https://goo.gl/photos/B2sSYod7ujWNWzHs6
Carb Inner Wall Dimension
https://goo.gl/photos/cT4pnqQs7rvVfC7SA