"This 1996 model has had crbs
"This 1996 model has had crbs serviced with repair kits, VRO serviced with repair kit. Puls restrictor replaced. The idle speed is still low even with timing indicated at recommended 4 deg.
The idling seems a bit better after all the above but the ingine stalls with a 'pffftt' and sometimes a puff of white smoke.
Does the recirculatory system have an effect on the idleing. How do I go about replacing the check valves in the system especially in the manifold. I worry trying to remove the valves from the block in case they break."
"This 1996 model has had crbs serviced with repair kits, VRO serviced with repair kit. Puls restrictor replaced. The idle speed is still low even with timing indicated at recommended 4 deg.
The idling seems a bit better after all the above but the ingine stalls with a 'pffftt' and sometimes a puff of white smoke.
Does the recirculatory system have an effect on the idleing. How do I go about replacing the check valves in the system especially in the manifold. I worry trying to remove the valves from the block in case they break."