I have a 02 mercruiser 5.0 gen 2 carb model. I had to replaced the intake manifold, Like a dumb dumb when I pulled the distributor I did not mark anything. Reading threw the service book, It tells me to align all the marks which I dont have. I have no idea where to start.
- I need to know once I get the number 1 on TDC where should the rotor orientation be for the 1 spot on the cap?
- Also when putting plug wires back on the cap do the numbers correspond to the cylinder numbers?
-I cant find the timing tab on the block
- I need to know once I get the number 1 on TDC where should the rotor orientation be for the 1 spot on the cap?
- Also when putting plug wires back on the cap do the numbers correspond to the cylinder numbers?
-I cant find the timing tab on the block