" I have a problem with a John
" I have a problem with a Johnson 225hp shift interrupter switch which suppose to momentarily kill one bank to lower rpm to facilitate forward or reverse gear shifting. The shift switch itself is good since rpm drops when its pin is manually depressed. However no rpm drop is observed nor does the switch pin even move at all when remote control is shifted to either forward or reverse gear. Is there a bushing or something that needs to be replaced? By the way, the problem seemed to occur after pulling down the gearcase to replace impeller. Thanks in advance. "
" I have a problem with a Johnson 225hp shift interrupter switch which suppose to momentarily kill one bank to lower rpm to facilitate forward or reverse gear shifting. The shift switch itself is good since rpm drops when its pin is manually depressed. However no rpm drop is observed nor does the switch pin even move at all when remote control is shifted to either forward or reverse gear. Is there a bushing or something that needs to be replaced? By the way, the problem seemed to occur after pulling down the gearcase to replace impeller. Thanks in advance. "