Hello I'm having I hope a simple problem I changed my engine oil and filter, lower unit oil, and I have changed my 10 micron filter coming from my fuel tank a 100HR service so went for a test ride about an 2 hour plus, idle 1/2HR no wake zones, wide open 10mins 5600RPM'S back to idle 1/2 hour no wake zone than up to 4300Hundred RPM engine ran find coming back inlet everything good had to through a no wake zone than back to a wide open area here's the problem the engine would not go over 4000RPMS plus would surge I a am lost on what to do it runs fine as long I stay below 3500RPMS I did change the 10 micron filter thinking water but found none! I have 4 lites on my key switch no warning or buzzers
PLEASE ANY HELP MUCH APPRECIATED
Greg
PLEASE ANY HELP MUCH APPRECIATED
Greg