Jackman1939
New member
I just purchased a 5hp Force outboard - serial number 0E073246.
The guy I bought it from said it was a 1999. I have not idea if that is true.
I was unable to locate any info on the motor via the serial number.
The motor is real clean, and does not have many hours on it.
I got it started after removing the spark plug and spraying some starting fluid into the cylinder.
I had it setting in a 5 gallon pail of water.
It seems to run fine, however, I did not see any waterflow coming out of the upper unit.
I looked under the cowl, and there were no tubes or holes where water would normally come out.
I took the cowl off and inspected the block and did not see any type of cooling hoses.
I am baffled
HELP !
thanks,
Jack
The guy I bought it from said it was a 1999. I have not idea if that is true.
I was unable to locate any info on the motor via the serial number.
The motor is real clean, and does not have many hours on it.
I got it started after removing the spark plug and spraying some starting fluid into the cylinder.
I had it setting in a 5 gallon pail of water.
It seems to run fine, however, I did not see any waterflow coming out of the upper unit.
I looked under the cowl, and there were no tubes or holes where water would normally come out.
I took the cowl off and inspected the block and did not see any type of cooling hoses.
I am baffled
HELP !
thanks,
Jack