sunnydayfly
New member
This past week I was fishing a
This past week I was fishing and on the way back to shore all at once it seemed to drop one cylinder. When I returned home I checked the plugs and they were fine. Both cylinders have good spark and the keyway is not sheared. The engine seems to run fine in a barrel but does not have any power in the lake. If you remove one wire you can tell the difference when you rehook. The compression is 85 and 90. On the water with full power it acts as if it wants to go but can't quite go to full RPMs The plugs points are new and it was timed. It starts very easily. One or two pulls. Any help would be appreciated. This one baffles me.
This past week I was fishing and on the way back to shore all at once it seemed to drop one cylinder. When I returned home I checked the plugs and they were fine. Both cylinders have good spark and the keyway is not sheared. The engine seems to run fine in a barrel but does not have any power in the lake. If you remove one wire you can tell the difference when you rehook. The compression is 85 and 90. On the water with full power it acts as if it wants to go but can't quite go to full RPMs The plugs points are new and it was timed. It starts very easily. One or two pulls. Any help would be appreciated. This one baffles me.