thostorey
Regular Contributor
"AQ151C - I don't know wha
"AQ151C - I don't know what dizzy I have; it does not look much like the Bosch in the Seloc manual. I would like to lubricate and clean the centrifugal weights but I can see no obvious way to get at them without disassembling the whole dizzy and, as I have the Hot Spark installed, I'm in no hurry to do that. I've applied lots of electrical contact cleaner fluid and blown under the plates best I could with compressed air.
Any suggestions on how to get some lube on the weights and what kind to use? I understand that WD40 is not a good option although I'm not sure why.
Here are 2 view of the dizzy. Note the marking on the shaft. Can anyone identify the make?
http://tinypic.com/view.php?pic=20r3ay8&s=4
http://tinypic.com/view.php?pic=1238mpz&s=4
Tom"
"AQ151C - I don't know what dizzy I have; it does not look much like the Bosch in the Seloc manual. I would like to lubricate and clean the centrifugal weights but I can see no obvious way to get at them without disassembling the whole dizzy and, as I have the Hot Spark installed, I'm in no hurry to do that. I've applied lots of electrical contact cleaner fluid and blown under the plates best I could with compressed air.
Any suggestions on how to get some lube on the weights and what kind to use? I understand that WD40 is not a good option although I'm not sure why.
Here are 2 view of the dizzy. Note the marking on the shaft. Can anyone identify the make?
http://tinypic.com/view.php?pic=20r3ay8&s=4
http://tinypic.com/view.php?pic=1238mpz&s=4
Tom"