I have installed a new Vortec egine in 1991 Bayliner 2052. I have a new oil pressure sensor that is connected to the fuel pump. when I try to find out how to connect the original oil pressure meter, using the striped cable, the needle jumps a bit backwards and stay there until i release the cable.
how should everything be connected. I have also read somewhere that the gas pump wouldn't start until the pressure has raised a bit while cranking the starter. Mine starts when I turn the ignition on. What is the correct way to do it.
how should everything be connected. I have also read somewhere that the gas pump wouldn't start until the pressure has raised a bit while cranking the starter. Mine starts when I turn the ignition on. What is the correct way to do it.