classic 50 stator specs.. max rpm at 3000??

[rocknroj]

could my stator be causing me problems getting up to speed... ohm reading between red and red/white shows 150.. seloc and clymer list 56 to 76.. i have found different numbers though... like here https://www.outboardignition.com/page39.asp

got a dva adapter on order to do more testing..

still wondering.... i installed new triggers when i found fried wires...

before that replaced controls

looks like i get full movement of the linkages to the stop on the motor.,. and the throttle plates are fully open..

its a 4 cylinder circa 1985.. serial starts.658688

thanks

 

[fastjeff]

Ill bet the DVA will tell you the high speed coil in the stator is shot.

Jeff