gatortail43
New member
I bought this boat/motor with the tilt in down position (straight up and down), resting on the bar through top adjustment holes. I got a Clymer book which only talks about Power Trim/tilt but nothing about manual. I would like to raise the lower unit for driving etc. but can't find a way to get anything to move. I have a release switch set to "release" but it does nothing. I have tried prying anything that looks like a catch, and have loosened the sliding parts on both sides of the motor but they don't seem to be working for anything. The tilt won't budge like it is.
Any advise on releasing the tilt would be greatly appreciated.
Also I have yet to find any images that show the model I have. It would be helpful to see the parts workiing.
Thanks a heap
Any advise on releasing the tilt would be greatly appreciated.
Also I have yet to find any images that show the model I have. It would be helpful to see the parts workiing.
Thanks a heap
Last edited: