Logo
FULL SITE MENU

Almost ready to run

B

bob_on_this

Regular Contributor
"My two engines are almost rea

"My two engines are almost ready to run, and break in.
I will mount my wooden skid to a flat bed, hook up a battery, a fuel tank, and some gauges.

]http://i49.tinypic.com/5b4md5.jpg"[/IMG]

The only thing I need are the exhaust and oil coolers. (waiting for the Visa card to stop smoking).

Also,
Can I spray some Blaster into this cooler area to get some more rust off?

url]
"
 
"Bob:

Not sure which cooler

"Bob:

Not sure which cooler as your text with the links is a bit confusing.

You can usually clean any cooler with a 50% muriatic acid bath with no problems. Heating it and the part to at least 140 degress will help. Rinse well with water when done.

I think you'll find it far superior to the PB for crude elimination....diesel oil works well too, but much slower."
 
"Sorry, not sure if the photos

"Sorry, not sure if the photos came through.
The "cooler" is the area on top of the Walters RV26 V drive.
I will try the acid as you suggest."
 
Should be fine...

I'd h

Should be fine...

I'd hope Al will correct me if I'm wrong - he is the resident Walters V drive knowledge source
 
Back
Top