I am a Norwegian living in Trondheim, where it is impossible to acquire accessories for old outboard engines, and I am therefore kindly asking help from anyone who would be able to and want to accommodate my request
The trim/tilt harness of my 1981 85hp Yamaha is broken, except for the wiring from the (remote) switch and the trim motor.
To me the cabling accessory seems like an Evinrude/Johnson type from the same period (see attached photos), with the following wires connected to the relay bracket:
What I need is the cabling harness connected to the relay bracket, along with the bracket and relays.
If anyone has access to such a harness/accessory and would want to help me out, I would gladly pay up-front for the pertinent equipment and transportation to Trondheim, Norway – along with any reasonable remuneration
The trim/tilt harness of my 1981 85hp Yamaha is broken, except for the wiring from the (remote) switch and the trim motor.
To me the cabling accessory seems like an Evinrude/Johnson type from the same period (see attached photos), with the following wires connected to the relay bracket:
- A three-wire input from the (remote) switch – UP (blue)/DWN (green) and 12V (red
- 12V (red ) from the battery, and GND (black)
- · UP (blue) and DWN (green)
What I need is the cabling harness connected to the relay bracket, along with the bracket and relays.
If anyone has access to such a harness/accessory and would want to help me out, I would gladly pay up-front for the pertinent equipment and transportation to Trondheim, Norway – along with any reasonable remuneration
Last edited: