Working on a pair of '95 175's.
Rebuilt the carbs, adjusted the linkage and throttle cable.
Verified Quick start is operational on both engines.....idle drops after ~30 sec.
Port engine starts at ~1200RPM and drops to ~600RPM.
Starboard starts at ~1200RPM and only drops to ~900RPM. I tried to adjust the timing detent marked "low" w/o almost no effect.
I recently purchased a OMC ignition analyzer........haven't tried that yet.
Do not see anything mentioned in the manual regarding Idle RPM adjustment.
Any/all info welcome. TIA
Rebuilt the carbs, adjusted the linkage and throttle cable.
Verified Quick start is operational on both engines.....idle drops after ~30 sec.
Port engine starts at ~1200RPM and drops to ~600RPM.
Starboard starts at ~1200RPM and only drops to ~900RPM. I tried to adjust the timing detent marked "low" w/o almost no effect.
I recently purchased a OMC ignition analyzer........haven't tried that yet.
Do not see anything mentioned in the manual regarding Idle RPM adjustment.
Any/all info welcome. TIA