Logo
FULL SITE MENU

87b VRO 150 johnson lower end

C

chris zam

Guest
"Trying to change the impeller

"Trying to change the impeller. Unbolted lower end, and disconnected shift linkage, lower end drops about 1.5 inches but shift rod is still locked in. i saw a suggestion to remove the starter but it's already out of the way."
 
"i would say,u might have disc

"i would say,u might have disc rod,at wrong location,or it is catching on something...."
 
"Are you saying that you have

"Are you saying that you have removed the 3/8" pin-bolt under the starter, that goes through the shift clevis and through the shift rod?"
 
Thanks very much. We took out

Thanks very much. We took out the wrong screw. Reattached the linkage and removed the screw from the port side. Lower end slid out. Any special advice when we put it back together? or something preventative to do while the lower end is out?
 
make sure you are in neutral o

make sure you are in neutral or reverse which ever your manual says. that rod should be threaded and you have to measure to the 1/32" from the top of the lower unit to the hole in the rod......it took me a couple tries...
 
Back
Top