FstaRockr Burns
Regular Contributor
got trigger out of motor -I have a black, white, brown and purple wire -
readings as followed:
bk - wh : 742
bk - br : 1221
bk - purple : 1195
wh - br: 1953
wh - purple: 1927
br-purple: 2400
what do these mean? I wasnt sure if i measured them correctly, is my trigger ok?
I am troubleshooting a high speed miss / half power issue with bad spark..
Motor starts / idles VERY easily, just NO power above 2k rpms, and has basically half the power it used to(!).. timing light showed light on all 3 cylinders - either way...
my stator is currently in the fire (literally) - im burning off the plastic moulding! I will try rewire it or send it to a guru whose been doing it for 30 years -
yes i wish I was in the US and could speedily order a shiny CDI replacement but thats not the case! We have to make plans down here!
readings as followed:
bk - wh : 742
bk - br : 1221
bk - purple : 1195
wh - br: 1953
wh - purple: 1927
br-purple: 2400
what do these mean? I wasnt sure if i measured them correctly, is my trigger ok?
I am troubleshooting a high speed miss / half power issue with bad spark..
Motor starts / idles VERY easily, just NO power above 2k rpms, and has basically half the power it used to(!).. timing light showed light on all 3 cylinders - either way...
my stator is currently in the fire (literally) - im burning off the plastic moulding! I will try rewire it or send it to a guru whose been doing it for 30 years -
yes i wish I was in the US and could speedily order a shiny CDI replacement but thats not the case! We have to make plans down here!