catfishin_welder
Member
Bringing my late father's 1970 Johnson 60hp back to life. I've put new head gasket and water jacket gasket on. Has 152, 148,150 compression top to bottom. Has new Evinrude/BRP amplifier/powerpack which whines when key is turned to on position as the instruction sheet says it should new OEM points set to .010, (contacts cleaned before installation), new points wires, checked stator with my dva and it appears to be functioning within parameters, new rotor, cleaned distributor, checked plug wires, new oem coil, checked safety switch, seems to be ok (wont crank when depressed-will crank when released),Flywheel magnets and flywheel appear good. Ive cleaned every wire terminal and wire at the terminal block,It cranks over fantastic but NO spark. I'm spinning my wheels here. Point me in right direction somebody. Thank you in advance!