Have not fixed the timing problem and now have a new problem. When I turn the key, pinion engages and crank turns some from 1/8 turn to full turn and then crankshaft stops and grinding noise starts. Thought starter is bad and this time bought a merc $250 starter. Same thing. here is what I have done so far:
1, cleaned battery terminals
2. disconnected coil cable, so no firing
3. Used jumper cable thinking cables are bad
4. looked at flywheel ring gear , a small portion, when changed starter and looks good.
Thanks
1, cleaned battery terminals
2. disconnected coil cable, so no firing
3. Used jumper cable thinking cables are bad
4. looked at flywheel ring gear , a small portion, when changed starter and looks good.
Thanks