270/280 trim tab

[jsrocky203]

This message is for anyone who has the answer but is directed to Ricardo as he has seen pictures of my out drive. I think it is a 280 but there is no threaded hole on the prop shaft so I must use the tabbed washer to hold the prop cone on. I am looking for the trim tab and its fastening bolt. I have seen the PDF file with the trim tab and bolt shown but when you go to the parts list there are at least four different part numbers for the tab and four numbers for the bolt. The trim tab in question is the one that bolts underneath the exhaust port on the drive. Thanks in advance for any and all help.

Rocky

 

[el_pescador]

The 270 and 280 have different trim tabs. THe 270 (and 275) are "exhaust outlets". The 280 is just a fin with a stainless Allen screw 1/4" NC thread (20 TPI). Here is the Sierra version of the trim fin for the 280.

http://www.marineengine.com/parts/p...94&returntopage=sierra_marine/sierra00872.htm

 

[am_dew]

And here is the 27o trim tab.

http://www.ebay.com/itm/VOLVO-PENTA...462453&pt=Boat_Parts_Accessories_Gear&vxp=mtr