Hi folks - I have a 2008 90ELTP 4S that left me stranded on the water yesterday needing a tow in. Motor pulled us without issue to fishing cove, powered off and used minnkota then powered back on idled out to channel and motor started acting like it wasn't getting fuel. Sometimes there was a squeel/wine when I turning key from no power to power. Long story short, we got towed back.
Last night I removed the FSM, dismantled and checked the low pressure pump (seemed ok and runs with suction off 12 volts), the high pressure pump (seemed ok and runs with suction off 12 volts) and the pressure regulator (the screen was full of black crap so I dismantled, cleaned and put back together thinking this may be the issue). Put everything back together today and still no start. High side seems to have fuel and pressure. Motor just cranks and doesn't try to start.
Anyone have any thoughts on what to check next?
Thanks,
Dave
Last night I removed the FSM, dismantled and checked the low pressure pump (seemed ok and runs with suction off 12 volts), the high pressure pump (seemed ok and runs with suction off 12 volts) and the pressure regulator (the screen was full of black crap so I dismantled, cleaned and put back together thinking this may be the issue). Put everything back together today and still no start. High side seems to have fuel and pressure. Motor just cranks and doesn't try to start.
Anyone have any thoughts on what to check next?
Thanks,
Dave