It's time to replace the lower unit seals for the first time on this motor due to water intrusion. This will be my first time doing this on a Yamaha outboard. I have done Merc, Johnson, and Tohatsu motors over the years. All are a little different. I ordered kit #: 6L2-W0001-C3-00 First question. I'm wondering if I will have a problem with the internals when removing the lower casing to replace the 2 O-rings and seals. Second question. Can I pull the drive shaft out without any problems to get to the 2 seals. I would appreciate any insight from anyone who has done this to a similar year and hp motor. From what I see on the Yamaha parts diagram, there's no detent ball and spring to worry about like there is on a Johnson 15 hp. Thanks in advance for your help.