charliefinch
New member
I have a 2005 Glacier bay canyon runner with 2005 150 hondas (2) and the port motor was having hesitant starts and now the starter is not engaging at all.
I can turn the switch on and go back and jump from battery lug to solenoid and will start right up. I switched the switches so that the port switch would start the starboard motor and it did. The starboard switch would not start the port motor though. I am not getting any voltage to the solenoid when the switch is in start position. I replaced the nuetral safety switch and checked for continuity when in nuetral and in fact had continuity through the switch. Would like any other suggestions I can get. Thanks
I can turn the switch on and go back and jump from battery lug to solenoid and will start right up. I switched the switches so that the port switch would start the starboard motor and it did. The starboard switch would not start the port motor though. I am not getting any voltage to the solenoid when the switch is in start position. I replaced the nuetral safety switch and checked for continuity when in nuetral and in fact had continuity through the switch. Would like any other suggestions I can get. Thanks