astrobud311
New member
2004 200 HP HPDI's, Went out today and ran the boat and did some fishing. Realized that my port trim/tilt is not working on my gauge, Just blank bars, no indication of where the motor is at. Not a big deal but would like to have it fixed. The tilt/trim on both motors work just fine all day. Tilt both motors up to pull her out, I go to drop them down and the stbd motor will not trim down, the tilt lock was not down. You can hear the motor running but it is not going down. I opened the reservoir cap and nothing came out, figured it was low on oil but it should still be moving?? I opened the manual release when I got home and lowered the motor all the way down, picked it up and rested it on the lock, opened up reservoir cap and bubbly milky fluid came out, quite a bit. My question is what would be my next step, the reservoir in now full of the fluid. I would appreciate any help I can get as this is the first time I had the boat out, and wanna be able to get offshore before the season is over.