I have an issue with power trim. It goes down just fine. it only goes up when I immediately go from down to up. While going down, if I stop, it wont go up again until I go down, then flick the switch to up. If it goes down all the way, I'm kinda screwed until I release the pressure with the screw on the side, and manually lift the motor. Then tighten the screw again. When it has paused, and won't go up, I do hear the relay click. I'm hoping its a relay. If it is a relay, the only numbers on them are (Siemens) VF4A-35F11-Z07 and VF4-35F11-Z07 I cant seem to find them or the OEM relays Serial number on motor is 0G151006. Please Help!