Logo
FULL SITE MENU

1995 175hp Evinrude Float Bowl

R

rkersh409

Contributing Member
My float bowls have been warped and leaking for a while now. Want to change them out when I clean and rebuild my carbs (been sitting for 6 years). Are any of the cheaper amazon bowls any good, or is it best to go with OEM. Thanks
 
You can also sand your current bowls down flat. Tape a piece of sandpaper to a piece of glass (good flat surface), and rub the bowls in a figure eight pattern until they are flat.
I did my 90 hp this way and they have been fine for a couple of years now.
 
riopga said:
You can also sand your current bowls down flat. Tape a piece of sandpaper to a piece of glass (good flat surface), and rub the bowls in a figure eight pattern until they are flat.
I did my 90 hp this way and they have been fine for a couple of years now.
Click to expand...

Thanks. Thought about that but didn't know if it would work.
 
Back
Top