Hello all - Just got a 1990 something Johnson 40hp which had no spark and took to mechanic to troubleshoot who replaced the stator, cdi and coil. After this it was running. Then of course when launching the boat for the first time it wouldn't start. The mechanic is out of town for a while and I have tested spark at 1/2 inch, timing is on the mark, compression in #1 is 125 and #2 is 130, water got in the fuel so replaced fuel and flushed out of the carb bowls and got new plugs. Have also tried spraying fuel mix and starter fluid in carb and piston just to see if I could get any pop. When starting am holding in key choke and can hear a click when pushing in, have also tried turning red valve in the opposite way. Any advice is greatly appreciated.