Logo

1990 200 hp Evinrude

romex

Member
"Motor will not start(Run&

"Motor will not start(Run) unless i disconnect the single wire plug ( Black\yellow) from the powerpack. unplugged she starts on the 3rd spin, connected she turns over but will not crank.once started with the plug disconnected she will not turn off from the key switch until the plug is reconnected. Any Ideas?"
 
"u have a bad key switch,kill

"u have a bad key switch,kill sw,or blk/yell wire shorted to ground,somewhere in eng harness,or in control box,..most likely ign sw,or conn ,ON switch."
 
Back
Top