I have a '89 9.9hp that I am attempting to revive. The first issue I have come across is that the pull cord will not retract after pulling. Started by removing cowling and attempting to remove the recoil assembly, but it seems to attached to the flywheel. I have found the service manual, but it has no instruction for removal. I have searched and searched youtube, every other engine seems to have a nut on top of the flywheel/recoil assembly that needs to be removed, this engine has a black "button" that im not sure if I am supposed to pry off? I also seached this forum for a while before giving up and starting a thread.