J
J. McBride
Guest
" I have a 1968 Evinrude 80 hp
" I have a 1968 Evinrude 80 hp
The original problem was water in gas.
But not following proper trobleshooting rules
I jump in and messed everthing up.
Now got everthing back to spec.Point gap at .018
got spark,new fuel,new coil,new plugs.
This model has belt driven distributor that
advances when you throttle up......
There is a belt timing mark on the flywheel
but confused on the distributor.I set #1 to the
rotor at top dead center.Was able to get a pop now
and then but get fustraded........
Need help (PLEASE) "
" I have a 1968 Evinrude 80 hp
The original problem was water in gas.
But not following proper trobleshooting rules
I jump in and messed everthing up.
Now got everthing back to spec.Point gap at .018
got spark,new fuel,new coil,new plugs.
This model has belt driven distributor that
advances when you throttle up......
There is a belt timing mark on the flywheel
but confused on the distributor.I set #1 to the
rotor at top dead center.Was able to get a pop now
and then but get fustraded........
Need help (PLEASE) "