Huaraches829
Member
I tried starting my 15HP Mercury for the first time a almost 2 years. I pulled the choke once and then a second time. I pulled the cord and the motor started but only putt putted about 30 seconds and stopped. I turned the choke button toward the right to the Fast where it also says Start and pulled the cord again. It putt putted a couple seconds and now does not start. Not sure if I flooded the motor. I bought new spark plugs and going to try again next weekend when I have time. Can anyone provide this novice how to start the 15HP. I was told the outboard is an 1989 with a tiller handle. Should I pull the choke button out and turn the know all the way to the right then pull the cord. I need to fill the bucket full of water to submerge the lower unit which takes time and energy. Any suggestions would be helpful.