Logo
FULL SITE MENU

150hp Johnson

0

01johnson

New member
Model J150SLEUC I need the high speed jets . I got all new bowls and thrashed the old ones and forgot to get jets out . It gives 3 different sizes not sure which one I need with with the new bowls
 
Rwbutler said:
This site breaks the jets per model #,you need 6 jets.
Click to expand...
that was my thought too......until I looked at the parts diagram.
http://www.marineengine.com/parts/j...n=Carburetor+&+Intake+Manifold+-+150+H.p.

the OP is right, 3 different sizes are listed : 0.059; 0.069, & 0.070. If I had to guess, I’d say the 59 is for a high altitude application. More than likely it’s going to be the 69 jet but I can’t say for sure. And if I had to bet, the 70 jet would be in the Ocean Runner models.
 
Last edited:
Taking a closer look at the parts page, I'd say the right one is [h=1]0327558 - Orifice, 69D[/h]
If you scroll down a little further on the parts page is shows this list:
"Evinrude Johnson OMC Orifice, 69d 0327558 is also used in the following models and components:"

The list under the 69D shows every carbureted 150 from 1995 to 2006. Neither the 59D or the 70D list any other models. So, I'd say the 69D is your part, the only problem is marineengine.com only shows 1 in stock.

KJ
 
Back
Top