Logo
FULL SITE MENU

1988 evinrude 48 spl shift shaft

F

fastfirebird

New member
The shift shaft broke on my mo

The shift shaft broke on my motor. I have the new piece but I am unable to get it in. I have the starter out and all the bolts holding the lower cover out. do I have to pull the power head? or is there a secret to getting this in.
 
"you will have to remove the g

"you will have to remove the gear case/dis assemble it to install the new one,no powerhead removal is nessacary"
 
"Scott.... I assume that you&#

"Scott.... I assume that you're speaking of the horizontal shift shaft located under the bottom carburetor. Unfortunately, I don't recall ever having to replace that shaft BUT it's possible that the powerhead would require being removed if all else fails.

Thousands of parts in my remaining stock. Not able to list them all. Let me know what you need and I'll look it up for you. Visit my eBay store at:

http://stores.ebay.com/Evinrude-Johnson-Outboard-Parts-etc?refid=store"
 
Yeah Joe that is the one I spe

Yeah Joe that is the one I speak of.. It is just lacking fitting by a ever so slight amount. I might try taking the lower carb off so that i can let the lower cowling to rotate a bit more. If I have to take the power head off it is only 10 bolts right
 
Back
Top