Logo

Search results

  1. N

    Cowling rubber

    See cowling gasket is unavialbe for my 1988 9.9hp motor but thought I heard of a company that might make some .?Anyone hear of a manufacturer?
  2. N

    J20crcrd

    Can’t find this in parts section. Is it a Canadian model?
  3. N

    2003 25hp rope/recoil start add on

    Wanted to put a recoil start from a 1988 30hp recoil only start motor on my 2003 25hp electric start and thought I could do it easily. Of course the mounting for the three bolts is shorter from the 88’ which used the spacers. Looks like a 5/8ths difference I need to make up. Did OMC make a...
  4. N

    Spark plug thread size on 90hp two stroke

    Are they 14mm?
  5. N

    Yamaha 90 two stroke…newbie ?’s

    I own acouple smaller Johnson motors I work on myself and want to buy a 90 yamaha two stroke-and besides checking compression(what’s a good number),what would be some things to look for on a yamaha two stroke? I guess they are oil injected?Main thing I guess is to also look for overheating.
  6. N

    Difference in stators

    Looking to add electric start to my 1985 20crcos and looking up parts used and new and I see a 1992 uses a different part number, but I don’t see a obvious difference.The 92 says about being a three wire,but the 85’ looks like three wires in picture.Any info would be appreciated.
  7. N

    Phillips 66 SAE 30 oil

    Recently an elderly friend passed that had a boat many years ago and the family gave me three new bottles of this and I am sure I was a little kidwhen this was made. Not sure what motors it would have been used in?
  8. N

    Carry Handles 40hp

    Have a broken carry handle and the number stamped on it is 306236 which show unavailable,but found 384296 Carry Handle kit.Picture(not a photograph) looks like the same handle.Anyone verify?
  9. N

    Military motor AM40A

    Picked up this motor since seller wanted rid of (was ready to scrap it) fast for cheap. Made appearantly for military thus the strange model number. Long shaft 40hp pull start. Was trying to look it up but have to compare it to 70’s similar models. Has spark and about wore shoulder out just...
  10. N

    am-40A model OMC

    Anyone ever see this model # am-40A.?Tried looking it up here.Info I was given..No hands on..Appears to be a 70’s 40hp.Military surplus.
  11. N

    9r70c reverse lock

    Am I missing something or are these motors always in locked position.I. Recently got this for running the river and kept my other motors with the lock/unlock feature unlocked due to the rocks.Don’t see anything in parts diagram that is filling me in on a missing part that I can see..?
  12. N

    Wrong prop on 9R-70C?

    Picked up old motor and it has a Michigan prop #012008 8 1/4x8 that appears to be pretty much new.Problem is it fits very loosely on shaft. Thought this should be a nice slip fit. ID of bushing measures approx. .640 and prop shaft is .540 from my measurements. I found it listed to fit this 9.5...
  13. N

    Old metal tank venting

    Picked up an old metal 6 gal tank since my one with plastic gauge is cracked. When tank was filled and hose left off and cap put on tank pressure pushed gas out fuel supply nipple. I see the left pin is for the vent since there is hole below it in casting. I blew air in hole and pushed pin in...
  14. N

    Fun with 25hp to 30hp conversion

    Hope I do not get beat up to bad on this thread.I know this subject has been brought up many times and I found plenty of info on it, but not anything on this question..Acouple of years ago I converted my 20hp(J20CRCOS) to 25hp by changing out the intake and it has been running fine.Last year I...
  15. N

    1981 35hp vs an 82 or later 30/35hp

    Was sent poor picts of a supposed 93 35 hp.(no model #) and the pictures did not match the 93.The exhaust leg still has the small access cover on it which seems to have been not on 82' and later models and the top of the tiller is all I can see has no kill button on it.Can a lower unit from an...
  16. N

    I.D. plate matching tag on clamp question

    Have a E30RCCE which is the info on the power head plug.It is a long shaft outboard.The tag on the clamp is scraped almost completely off so I cannot get any info from that.Does the power head plug usually show if it is a long shaft since the power heads could go on either one?
  17. N

    Damage under impellar plate found.

    Pulled lower to check/replace impellar on my project Skitwin.Lifted the plate impellar rests on and found the cracked/bent piece of casting.I was not pumping water so until I get a new impellar I was wondering if this would cause any kind of pumping issue?I would be afraid to try and bend it...
  18. N

    Water pick up tubes

    Never mind following post,just found an old post on another 33hp Joe Reeves clarified that holes are supposed to be there for cooling.Do all of the Evinrude motors have a hole drilled in the copper pick up tube in them mid way approx?Saw this on my 69 skitwin while trying to flush it with a...
  19. N

    Evinrude 1969 skitwin model 33902A shift lever stop position

    I took pictures of my motor concerning the question on where the shift lever hits on the stop in neutral..First picture it hits as you can see when it is in neutral and with throttle turned as far as I can, this is pre-start up of course.I am of the opinion it should not hit where the first...
  20. N

    Evinrude 1969 skitwin model 33902A throttle position

    Finally got this motor ready to start and I did get it started for a second, but I have an issue I guess i should of realized before putting it back together to start.I am unable to turn throttle control to start position in neutral.The cam roller stops on the timing marks for the cam.The shift...
Back
Top