Logo
FULL SITE MENU

Search results

  1. C

    2000 Johnson 200HP V6 Ocean Pro

    I've developed a bit of a stumble at mid-range RPM durring acceleration and when throttling down as well mainly between 2k and 3k rpm. Engine idles great and at max rpm 5300 she runs great as well....I'm leaning towards ignition timing vs throttle position but if someone can chime in with an...
  2. C

    2000 Johnson 200HP V6 Ocean Pro J200VXSSS Carburetor Rebuild

    Purchased 6 carburetor rebuild kits from BRP and I'm aware of the bowl warping issue but before I dive into the rebuild this weekend what should I know if anything or what should I be made aware of in case I have to look for some special arrangement like a placement of a washer or what have you...
  3. C

    2000 Johnson 200 OceanPro J200VXSSS intermittent issue

    Show up to the dock 4:30 am pump bulb choke and start engine she stumbles once I choke and start again she runs in idle everything like usual for a 2 cycle kinda used to that start. Idle is fine warm up 20 mins pisser is good and we head out to the spot. After a 45 minute run at 3800-4200 RPM we...
  4. C

    Need a lesson in cylinder drop testing 2000 Johnson J200VXSSS OceanPro 200HP

    Just need a quick lesson in how to perform the cylinder drop test on the V6 looper i've begun chasing a problem on. Im not able to exceed 4700 RPM and have already completed a compression test which was 95 psi on for cylinders and 92 psi on the bottom two cylinders after warm up. Engine idles...
  5. C

    2000 Johnson 200 HP Ocean Pro Service Manual

    Anyone have for sale a Johnson outboard service manual part #787071 I will attach a picture of the exact manual I'm looking for. Thanks for you're time......
  6. C

    2000 Johnson 200 HP Ocean Pro RPM low

    At full throttle turning a 14.5" x 19 pitch on a 21 ft Chapparal I'm showing 4700 RPM on the gauge and a speed of 28-30, all prop calculators are saying I should be at around 5200 rpm with a 19 pitch and somewhere in the upper 30s for speed. Besides a possible carburetor problem or a link and...
Back
Top