Logo
FULL SITE MENU

Search results

  1. M

    still no luck with coupler HELP

    Well I unbolted the coupler and wen i pry it to try and get the rite angel the hole thing moves with eachother,can't emagin its bent cuz she runs real smooth,how much worse could this start leaking. I must have used it like this all season and lookes like I'm going to do the same this year. It...
  2. M

    coupler issues HELP!

    Wile I was cleaning the bilge I herd water dripping,to my surprise it turned out to be the stuffing box,seems that the large nut was never connected to the shaft.sprayed it with some w d 40 and got it to finally move but it must be alittle off cuz the threds wont start!Looks to me that the motor...
  3. M

    is desel oil beter for a gas engin?

    Well I red some reviews on here about desel oils being beter,even for a gas engin.Is there any truth to this,was thinking of putting some 15/40in my older 318's.thought I should check out your guys opinions first.Is this too thick.My dad always tought me to use strait 30,but red on here about...
  4. M

    oil filter looking thing

    Can someone tell me what these thing do,its on the valve cover and has a hose that runs into the flame arrester on the other side of the PVC valve,almost looks like an oil filter.it seemed to catch some condinsation.also look original should I replace them and are they expencive? Thanks Marc
  5. M

    can non tox antifreeze hurt cooling system

    Well over the winter had an antifreeze leak and had to add about a galon of antifreeze and all i had was some leftover non tox,its --50 degre (the pink stuff)but should i flush it out now.The fluid in the tank still appears green so it must have mixed ptetty well but can it cause any corrosión...
  6. M

    zinc in exchanger?

    Well I've had boat for two years now,how would I know if I needed to replace the zincs,is like the running gear and should they be changed every year or 2...will I see electrolasis along the unit,engin is a 79 318chrysler,has the H E under manifold ,long tube style,I didn't even no there wer...
  7. M

    removing thermostats

    Was wondering peoples thoughts on removing the thermostats on an older 318chyrs , I know they wer put there for a reason but my mecanic sugested takeing them out , I must say , motors are now running a consistent 160-165 compaired to 180-195 after long runs , my question is can I harm anything...
  8. M

    antifreeze leek out exaust

    I have an older silverton, 79 , 318 chrysler twins, seems to only happen on cold starts, blows antifreeze out exhaust, none in oil, but I did notice a lower compression reading on one cylinder, 80 pounds compared to 120(not too bad) motor runs surprisingly well, I was considering trying a bottle...
  9. M

    antifreeze leek out exaust 1979 318

    I have an older silverton, 79 , 318 chrysler twins, seems to only happen on cold starts, blows antifreeze out exhaust, none in oil, but I did notice a lower compression reading on one cylinder, 80 pounds compared to 120(not too bad) motor runs surprisingly well, I was considering trying a bottle...
Back
Top