Logo
FULL SITE MENU

Search results

  1. J

    D6 with DPH-A shift cable replacement issues

    I just purchased a 2007 Sealine SC38 with twin D6 310A-B driving DPH-A outdrives. I’ve had Engines and Outdrives Serviced completely. My mechanic wanted to replace both gear shift cables but failed due to lack of space internally. Claims that the Engines have to be moved 3 Inch’s forward to...
  2. J

    350Q Exhaust Valve replacement

    Hi Guys, Any ideas on where to purchase Replacement Exhaust/Intake Valves for 1975 Chris Craft 350Q ? Can I use Automotive Valve for this engine? Regards from Germany. Johnscott
  3. J

    Steaming 350Q

    Hi Guys Have a little issue with the Stbd Thermocon 350Q in my 1975 35' Aft Cabin. Last fall I was coming back on the Main River when my buddy behind me called on the Radio to tell that my Stbd. engine seemed to be smoking from the exhaust. After inspection found that it was steam coming from...
  4. J

    CC 350Q Thermostat

    I would like to replace my Thermostats on my 1975 350Q's. The old ones have 143 stamped on them. I'm not sure if these are the correct ones. Can anyone give me info on the correct Thermostats to use on these engines. Mine are raw-water cooled. Standing By Johnscott.:cool:
  5. J

    Alternator Belt and Waterpump Belt Size????

    Need to replace my Belts on both 350Q's in my 75 Catalina. I have the part number but would like to purchase the Belts here in Germany. Anybody know the size of the Belts???? Hope for some feedback. Thanks.:cool: Johnscott
  6. J

    TAMD 61A Power Loss

    Need some help with a TAMD 61A. We have a 42' Neptune Sedan with two TAMD 61A . The Starboard engine losses power after about 1 hour operating in all power phases from max to idle. The engine produces black smoke and RPM will not go higher than 1500RPM. Fuel is fed from one tank to both engines...
  7. J

    Onan 6.5kW MCCK.....Need help!

    Onan 6.5kW MCCK.....Need help! Trying to get my Gen operating again. Would not start without manually playing with the throttle. Replaced the points and set the Timing. Then cleaned the Carb and fuel pump (Bendix). Set low and high...
  8. J

    Onan 6.5kW MCCK.....Need help!

    Trying to get my Gen operating again. Would not start without manually playing with the throttle. Replaced the points and set the Timing. Then cleaned the Carb and fuel pump (Bendix). Set low and high speed jets to factory settings (1 to 1 1/2 of the seat). Cleaned the Vacuum Boost. Then started...
  9. J

    1974 Flywheel 350QL ?

    Does anybody know the size/ number of teeth of the Flywheel on a 1974 Chris Craft 350QL? Need to replace my Ring Gear due to missing teeth.... Is it possible to remove the Flywheel with the engine still installed in the boat? It looks like the front engine mounts are bolted to the Flywheel...
  10. J

    Need Help on Flywheel Ring Gear replacement on a 1975 Chris Craft 350Q....

    Found the Part # 16.11-08290....Does anybody know if you can replace just the Ring Gear on this Flywheel or do have to replace the complete Flywheel....Mine is still installed but I can see that a couple of teeth are missing and its slowly starting to chew up my Starter drive pinion gear..... If...
  11. J

    Need Help...Starter Part Number 1975

    Can anyone Help??? Trying to ferry my newly purchased 1975 Chris Craft 35' Double Cabin back home. On the way my Port starter gave up on me... Looking for a replacement. Looking for the part number of this starter....No numbers on the old one. I have Chris Craft 350Q's and the port engine turns...
  12. J

    Hardend Valve seats in the Chris Craft 350Q

    Hi Folks, Just bought a 1975 Chris Craft 35 Double Cabin with twin 350Q, here in Germany, and want to convert the engines for LPG (Liquid Propane Gas) operation due to the HIGH cost of "Benzin" here. My Gas man thought that the 350Q engines will not handle LPG because he believes that the...
Back
Top