Logo
FULL SITE MENU

Search results

  1. N

    1974 evinrude 6hp leaking gear oil question

    "Thanks in advance, I have a 1974 6 HP Evinrude that I am getting drips of gear oil out of the prop hub. Just a little bit every few days. My question is, when I replace the seals, I have been told that there is a very expensive "seal retainer" somewhere that needs to be removed prior to...
  2. N

    PROP SEALS ON 74 ERUDE 6HP OUTBOARD

    "I am getting a few drops of g "I am getting a few drops of gear oil out from behind my prop. I am told that I need to change the prop seal and the O ring in the case. I understand that there is a seal retainer on the main seal that is a real SOB to get off without causing dammage to the...
  3. N

    BAD CYLINDER UPDATE

    And the hits just keep on comm And the hits just keep on commin.... Just got off the phone with my Mech and he said that when he pulled the lower cowlings (spelling???) that 2 of the bolts holding the power head on fell to the ground and a third was backed out half way.. All this thanks to the...
  4. N

    I WOULD LIKE EVERYONES THOUGHTS ON THIS

    "Here are the facts..1994 90HP "Here are the facts..1994 90HP Merc. Top and mid cylinder at 115 and 105. Bottom hole at 80. I took the air box one day and found a small puddle of gas/oil in the bottom carb throat, last time I took it out at 5000rpm the overheat alarm went off until I took it...
  5. N

    ANYONE WANT A SIDE JOB IN OR AROUND TAMPA FL

    I need to get one of the cylin I need to get one of the cylinders on my 94 90HP Merc rebuilt. Nothing else is needed. Both the other cylinders are fine. Please let me know. Feel free to forward this to someone who you think may be interested. John
  6. N

    IS IT OK TO FIX JUST 1 CYLINDER

    I have a cylinder that is at 8 I have a cylinder that is at 80 pounds. Both the others are over 100. Is it ok to just replace the pistons and rings in the bad cylinder? John
  7. N

    Compression question

    "Hell to all. Here is the ques "Hell to all. Here is the question. I have a 1994 90 hp Merc that is getting the carbs rebuilt today. My Mech called and said that he wanted me to know that my compression was 115, 105 and 80 in the bottom cylinder. The motor runs pretty well for its age although...
  8. N

    Warning horn question

    "1994 90 HP Merc. Is a steady "1994 90 HP Merc. Is a steady un-interrupted horn oil or overheat? It only comes on at 5000 rpm and stops when I drop to 1000 rpm. I can run at 4000 rpm all day with no prolbem but, once I hit 5000 it goes off. This is NOT a beep-beep-beep it is a steady horn.Is it...
  9. N

    WARNING HORN AT 5000 RPM AND GHOST THROTTLE

    "Ok guys, Here are 2 questions "Ok guys, Here are 2 questions in one. Had the boat out today and my 1994 90hp Merc was running fine (it seemed) When I throttled up to 5000 about 30 seconds later I get a constant horn and my oil light comes on. I have a full tank and it looks to be burning oil...
  10. N

    SEA FOAM REVIEWS

    Anyone out there used seafoam Anyone out there used seafoam before in the gas tank? How did you like it? do you recommend it? John
  11. N

    OIL PUDDLE IN CARB THROAT

    "I have a1994 90 hp Merc that "I have a1994 90 hp Merc that has been running really rich lately. At idle it seems to be ok but when I give it throttle there is alot of 2 cycle smoke. I pulled the air box and found a small puddle anout 1.5 ml of 2 cycle oil in the bottom carb throat. The other...
  12. N

    Spark plug torque question

    "I replaced the plugs in my 19 "I replaced the plugs in my 1994 90 hp Merc. I torqued them to 20lbs as the manual states but they still seem like the had a few good turns to go. In other words, the plugs did not seem to "bottom" out is this normal? I used another torque wrench and got the same...
  13. N

    1994 90hp Merc questions

    "Hey guys, I have a 1994 90hp "Hey guys, I have a 1994 90hp merc that I have some questions on. First I will start by saying the motor ran great until I had a mech put a new mis-section in it. That was about 2 months ago and last night was the first time I have been out in it since. The first...
  14. N

    PARTS MOTOR NEEDED 1994 90hp merc

    "Hey guys, I live in St Pete, "Hey guys, I live in St Pete, Fl near Tampa. I am looking for a good mid-section with good mounts for a 1994 90hp (single ram) Merc. Anyone near by have one??? Thanks, John"
  15. N

    INFO NEEDED ON CHANGING THE YOKE AND BUSHINGS ON 1994 90 HP MERC

    Has anyone changed the lower m Has anyone changed the lower mounting yoke and bushings on this motor or know anything about it?? How involved is it? it looks like I just need to pull the lower unit and then the snap ring and back out the bolts that hold the yoke in place then remove and install...
  16. N

    UPDATE ON MY MOTOR MOUNT QUESTION PLEASE HELP

    "long story short, my motor sh "long story short, my motor shakes more than I think it should at idle / low idle. I have noticed that the botton "mount" that goes fron the bottom of the transom bracket that connects to the mid-section has alot of play in it. The area I am refering to is where...
  17. N

    MERC 90 HP LOWER MOTOR MOUNT QUESTION

    "Hey guys here is another ques "Hey guys here is another question on my mercury. It is a 1994 90 hp and the bottom has more travel than I think it is supposed to. The motor shakes quite a bit at idle to low idle and I notice most of the play is where the mount connects to the lower mid section...
  18. N

    WHAT YEAR IS MY MOTOR

    "Hey folks I have a 90 HP merc "Hey folks I have a 90 HP merc SN# 06063976 I am trying to find out what year it is. I just bought it and I am not sure if it is a 94 which, is what I was told. Can someone please help. John"
  19. N

    90 hp Merc questions

    "Sorry I have posted this twic "Sorry I have posted this twice I am just hoping to get more responces. I just bought this boat with a 90 hp Merc on it. The motor is a 94 or 95 not sure just yet. My questions are. #1 there is a small weep hole less than 1/4 inch on the right side of the motor...
  20. N

    FEW QUESTIONS ON MY 94 MERCURY

    "I just bought this boat with "I just bought this boat with a 90 hp Merc on it. The motor is a 94 or 95 not sure just yet. My questions are. #1 there is a small weep hole less than 1/4 inch on the right side of the motor located on the lower unit right at about the height of the top of the prop...
Back
Top