Logo
FULL SITE MENU

Search results

  1. M

    OMC 800 tilt problem

    I have a tilt motor problem with my OMC 800 series stern drive. The motor will not lift up the out drive. I am not sure of the year of the out drive. It has a mechanical shift cable, if that will help Identifying the drive. The boat is a 1979 2000 Tierra *20' with 350 5.7 engine. The out drive...
  2. M

    Water in oil 350 5.7 OMC 800 I/O 1982+

    I tryed the extension thing and the intake is solid. I tryed the air pressure, I hear no hissing or whisle. I had no gage to check the pressure, but I blew a whole in the water pump hose. Is there anything else I can test? Someone said to loosen the exhost manifolds and run water through the...
  3. M

    Water in oil 350 5.7 OMC 800 I/O 1982+

    1979 20’ Tiara cuddy cabin 1979 OMC 800 Series stern drive New engine about 4 or 5 years old 350 5.7 Chevy 260 hp The whole stern drive has been replaced with an OMC 800 series (1982 +), after hitting a sand bar and braking the old stern drive. While replacing the stern dive (did it myself) I...
  4. M

    Water in engine oil 1979 800

    1979 20’ Tiara cuddy cabin 1979 OMC 800 Series stern drive New engine about 4 or 5 years old 350 5.7 Chevy 260 hp The whole stern drive has been replaced with an OMC 800 series (1982 +), after hitting a sand bar and braking the old stern drive. While replacing the stern dive (did it myself) I...
  5. M

    1979 OMC Steering removal

    My steering on my 1979 OMC 800 My steering on my 1979 OMC 800 2000 Taira outdrive is hard to steer. How do you remove the steering bracket? Do I have to remove the engine first (I hope not)? Has the true steering. The steering bracket with cable and shaft is right behind the engine with close...
  6. M

    1986 60hp Johnson replaced VRO help

    "I have replaced the VRO fuel "I have replaced the VRO fuel pump with a new regular fuel pump. First I plugged up the pulsating line. Then installed regular fuel pump on the fuel pump mount that is there which has a pulsating fitting. Connected fuel lines to original connection. It seems to...
Back
Top