Happy new year everybody . I have a 175 hp Fichts and I need to change an injector , do I need software to perform this task ? Anybody know where I could get the software ?
I recently fitted Verados to a Boston Whaler , Ive been through the calibration for the fuel gauge and every time it gets down to half the low fuel alarm sounds . I only have one tank on the boat and it seems to think there are 2 tanks , is the something to do with the rigging or just the...
Ive got a 50 yamy 4 stroke and the carbs are doing my head in , ive cleaned them 3 times and still the motor is not running on all 4 cyl at idle . If I spray ether into the intake she fires up so it has to be carbs , anybody got an online manual or the specs for these carbs ?
Ive just dropped an oil pan on a 12cyl Detroit that had lost oil pressure and locked up to find the oil pump gear had broken . Is this a common fault or just metal fatigue and old age with thousands of hours ? The main and bigend bearings had picked up and the oil filter I cut open and it was...
Ive got a 0x66 and when your running on plain she will shut down like you've pulled the kill cord , she will start up again and run . this is an intermittent problem but it is becoming more regular . Im thinking fuel pump , any ideas ?
ive got a 130hp carb johnson and its overfuelling like crazy , when I run it on the hose the floor is black from fuel and oil , she smokes like a chimney also . The carbs are clean and the fuel is good , I checked spark and she seems fine . Any ideas ?
I just installed 2 used 250 verado on a 26 B/w , it originally had 200 optis on . the optis were 25'' and the Verados are 30 '' , the boat lists real bad to the stb side when coming onto plain , if i trim the motors up she will run better , if I trim the motors up to 1.5 before i try to get on...
Ive got a 5.7 carb engine wich I put a new crank and bearing in , the engine had 6 hrs from new when it picked up on the crank so I changed that and put it back together . It was running great for 2 hrs and then a tik tik started happening , I thought hyd lifters so I changed them and now the...
Ive got a 90HP yamy , Im not sure of the model as the tag is gone . Its a carb engine and Im not getting any spark , I tried hooking up the diagnostics but this engine doesnt seem to have a port for doing diagnostics . Any ideas of what to test ?