Logo

Recent content by GarrenMedley

  1. G

    Won’t go into reverse

    Good evening, I have a 1996 Johnson 48 spl. The motor stopped going into reverse. If it’s in the water and I try to put it into reverse it’s just makes a clicking sound, revs up and a vibration in the controls. If the motor is out of the water and off it goes right into gear and if I put the...
  2. G

    96 Johnson 48

    So I'm having a couple of issues. First off the engine seems like its only running on one cylinder. If I stay the engine and let it run it seams fine but once I give it some throttle it starts arcing from the lower spark plug to the cylinder head. I have replaced the coil, power pack, plugs...
  3. G

    J48ESLEDC wiring

    Good morning all. I am in need of some assistance. I just received this 96 Johnson 48 and it had no engine wiring harness. So I got one for it but I'm not sure of what colors go to what on the wiring block. Can someone help with this. A picture would be great or in detail description would be great.
  4. G

    88 Evinrude 28 HP

    OK so I was running down the water and hit something. The motor popped up and was running wot,so I shifted to N and the motor shut off. I went to restart and it wouldn't. So I started in high idle and it wasnt that high. I pulled the cover off and then restarted and it started fine and did...
  5. G

    Rough idle issues

    OK so I acquired a 88 Evinrude 28 spl. Before I did anything there was rough idle issues and would shut off. So I rebuilt the carb and fuel pump, put in new plugs, new water pump kit, rebuilt the lower unit and resealed, new thermostat w/seal and fresh fuel. Once all together I ran it and it...
  6. G

    1988 Evinrude 28 HP SPL

    Good evening, So I just bought a 88 Evinrude 28 HP spl and was domestic what the difference between the 25,30,and 35hp is? Also I see that the lower unit that is on it has the tiny prop. Can someone please give me the pro's and con's of this motor? Just not familiar with this motor. Also...
  7. G

    79 Johnson 15 hp

    Hello and happy Easter everyone! So I was wondering if someone could please tell me what all would cause my outboard to pop in and out of gear? I have the shift Linkage adjusted in accordance with the manual, but it keeps popping out of gear and sounds like a skip when under full throttle. Also...
Back
Top